Weekly briefing

AI briefing, week 46/2026: Copilot limits, Claude in the EU, Fable 5.2

Reading time
10 minutes
Published
Topic guide
AI models
Written by
modernagents editorial teammodernagents is an AI automation agency for SMEs.
AI-generated image: Portable audio recorder with an indigo protective side casing on galvanised steel

This week matters most if your team works in Microsoft 365. Copilot Chat comes with the subscription, a few people use it every day for emails and quotes, but nobody has bought a Microsoft 365 Copilot licence. That is exactly where Microsoft is changing things right now, and there is good news for everyone who has kept Claude in Copilot switched off for data protection reasons.

An example: a plumbing and heating firm in Ghent with 30 staff works with Microsoft 365 Business Standard. Lotte from the office uses Copilot Chat to summarise long customer emails and to draft quotes. Nobody in the firm has a Copilot licence, and Claude is switched off in the Copilot settings. This issue covers news from 4 to 11 November 2026.

Key takeaways

  • Copilot Chat without a licence can now hit limits on more features. Tell your team the notice is not an error, and do not rush to buy licences.
  • Microsoft moves default usage-based billing for new Copilot Business subscriptions to the first quarter of 2027, and it is then meant to apply in Germany too.
  • Claude in Copilot is meant to run inside the EU Data Boundary by the end of 2026. Until then it stays off in the EU unless your admin switches it on.
  • Claude Fable 5.2 costs less than the previous version but usually requires 30-day data retention. For most tasks in a small business, a smaller model is enough.

01 / 06

Copilot Chat without a licence: new limits since November

Lotte wants a long complaint summarised before lunch, and Copilot Chat says the feature is not available right now and will be back later. That is not an error. Since early November, Microsoft has been adding limits in Copilot Chat for users in business tenants who have no Microsoft 365 Copilot licence. Image generation already had such limits, and now more features are added. The rollout began on 2 November for organisations with 2,000 or fewer Microsoft 365 seats and on 9 November for larger ones (Microsoft Partner Center).

Microsoft does not say which additional features are affected or where the limits sit. The limits can vary during the day, and your admin can neither see nor change them. A user who reaches a limit sees a notice in Copilot that shows when the feature is available again. A response that is already being written is not interrupted. Copilot Chat stays included in the Microsoft 365 subscription.

The firm in Ghent with its 30 seats can therefore already be affected, like most small and mid-sized businesses. Expect a call from your Microsoft partner too. Microsoft openly encourages its partners to use these notices to start a conversation about Copilot licences, and shows them in a separate report which customers have users reaching the limits.

In most organisations the notice has a button a staff member can use to request a licence from the admin. If your organisation allows direct purchases, they might also see an offer to buy the licence themselves. Admins can turn off direct purchases for each product.

This one is worth acting on now:

  1. Tell your team that the notice is not an error, and who in the business decides on licences.
  2. Check in the Microsoft 365 admin center whether staff can request or buy licences themselves. Turn off direct purchases if you do not want them.
  3. Note for a few weeks who hits the limits and how often. Only then is it worth asking whether individual people like Lotte need a licence.

Whether a licence pays off at all, or whether your own knowledge assistant fits better, is compared in Microsoft Copilot or your own RAG system.

02 / 06

Copilot Business: usage-based billing comes later, then in Germany too

If you planned new Copilot licences for December, a date we pointed to in week 45 has moved. For new Copilot Business subscriptions bought through a Microsoft partner, usage-based billing is no longer switched on by default from 1 December 2026. Microsoft now plans the start for January to March 2027. This also applies to Germany, where this default billing was at first not expected (Microsoft Partner Center).

The principle stays the same. Some AI features, such as Copilot Cowork, cost money by usage on top of the licence. Microsoft sets a default limit of 4,000 Copilot Credits per user per month for this, which your admin can adjust. Once the change has rolled out to you, a new Copilot Business purchase through a CSP partner also switches on usage-based billing by default for the Copilot Business licences you already have in the same Microsoft 365 tenant.

The second date stays. From 1 December 2026 you can buy Microsoft 365 Copilot and Copilot Business without a Microsoft 365 base subscription (Microsoft Partner Center, October). How usage-based billing works is explained in week 41.

Here, planning is enough. Ask your Microsoft partner when usage-based billing will be switched on for you and which monthly limit they set. Set a limit that fits your budget before anyone on the team uses Copilot Cowork.

03 / 06

Claude in Microsoft Copilot: EU Data Boundary planned by the end of 2026

Many businesses in the EU have kept Claude in Copilot switched off so far. Microsoft itself states the reason: Claude models in Copilot, Copilot Studio and the Microsoft 365 apps are currently excluded from the EU Data Boundary, Microsoft's commitment to store and process customer data within the EU and EFTA, with limited exceptions. They are off by default in the EU, EFTA and the UK (Microsoft Learn).

That is set to change. According to Microsoft, organisations in the EU and EFTA can use Claude in Copilot by the end of 2026, including in Copilot Cowork, with processing within the EU Data Boundary. Microsoft gives no exact date. The setting stays off by default in the EU and EFTA, and your admin can switch it on for everyone or for selected groups. According to Microsoft, organisations already using Claude in Copilot through Microsoft today do not need to do anything, and processing is to move into the EU Data Boundary once it is available (Microsoft Copilot Blog). Organisations in the EU, EFTA or UK that switched Claude on earlier under Anthropic's own terms need to opt in again to today's arrangement through Microsoft, according to Microsoft Learn.

If your data protection officer has so far turned Claude down because processing runs outside the EU Data Boundary, that can change by the end of the year. Whether the new arrangement meets your requirements is something to check once Microsoft publishes the details. The EU Data Boundary also covers the EFTA countries, and Microsoft's commitment has limited exceptions. That matters most if your data must not leave the EU. Microsoft's blog does not say whether the new arrangement also covers the models Microsoft lists as "Anthropic models with Data Retention". For these models, such as Claude Fable 5, Anthropic's terms apply according to Microsoft Learn. Anthropic stores most inputs and outputs there for up to 30 days, and according to the same page an admin always has to switch these models on separately.

We recommend planning:

  1. Keep the setting off until Microsoft confirms processing within the EU Data Boundary and your data protection officer has checked the details, if your rules require it.
  2. Decide which groups should use Claude then, in the plumbing firm for example only the office.
  3. Add the change to your record of processing activities when you switch Claude on, and write down in your AI usage policy who may use it.

Got a workflow like this?

Tell me about it. Honest take and a rough price, usually within a day.

AI models →

04 / 06

Claude Fable 5.2: cheaper, but usually with 30-day data retention

For most tasks in a small business, such as sorting emails or reading invoices, you do not need Anthropic's largest model. Claude Fable 5.2 matters to you if a provider handles difficult development work for you with Fable 5.1, or if your workflows already run on it through the API. At standard API rates, Fable 5.2 costs 8 US dollars per million input tokens and 40 US dollars per million output tokens, 20 percent less than Fable 5.1 (Claude Platform release notes).

For most coding and knowledge tasks, Anthropic still recommends Claude Opus 5.5 as the starting point, with Fable meant for the most demanding open-ended work. The same model with fewer safeguards is called Claude Mythos 5.2 and is only open to verified organisations, for example through Anthropic's verification programme for cybersecurity professionals (Anthropic).

There is a data protection catch you should know about before you switch. The safeguards of Fable 5.2 look at a window of usage data, not only at single responses. That is why Anthropic requires 30-day data retention for Fable 5.2, on every platform that offers the model. On the Claude API, Anthropic handles the retained data, while on Amazon Bedrock and Google's Agent Platform it stays within the cloud provider's environment. Zero data retention, under which Anthropic does not store prompts and responses at rest after the API response for the covered API features, is only available for Fable 5.2 with express approval from Anthropic.

For now, watching is enough. If your provider uses Fable 5.1, ask them to test the switch. Before that, check with the person responsible for data protection whether 30 days fit the data that runs through the workflow, especially customer data. How to test a new model on your own cases is described in Your own AI benchmark.

05 / 06

In brief: the other providers

Provider What is confirmed What you can do
Google Skills have been coming to Gmail, Docs, Slides, Drive and Chat on the web since 9 November. On 17 November, Gems move to Settings in the Gemini app and keep working. In Business and Enterprise editions, skills replace Gems no sooner than 1 March 2027 (Google Workspace Admin Help) Plan: rebuild the Gems your team uses every day as skills
Google Gemini in Google Forms summarises responses, shows trends and suggests next steps, for example in Business Standard and Plus. The rollout is staggered, and domains on Scheduled Release start on 19 November, which can take up to 15 days (Google Workspace Updates) Watch: check the analysis against the real responses before you act on it
Microsoft From 1 January 2027, partners offer two bundles of Dynamics 365 Business Central and Microsoft 365 Copilot Business for up to 300 seats, also without a Microsoft 365 base subscription. At the current US dollar list prices, each bundle costs 6 US dollars per user per month less than the separate products, with local-currency prices to follow before the start (Microsoft Partner Center) Plan: if you are introducing or already use Business Central
Mistral Mistral Studio gets managed agents and apps, workflow triggers from business systems and tests against your own data. Studio runs in the cloud, in your own private cloud or in your own data centre (Mistral) Watch: of interest if agents should run on your own infrastructure
OpenAI ChatGPT Images 2.6 generates images faster, keeps details better across edits and can reuse saved reference images in later chats. GIFs are rolling out step by step (ChatGPT release notes) Watch

06 / 06

For your IT team

Before you switch to Fable 5.2 through the API (model ID claude-fable-5-2), check your code. If your code edits the system prompt, the tools or an earlier message and then sends back a Fable 5.2 thinking block from a later turn, the API returns a 400 error. With 5.2 this applies to every account. Requests that still declare the older computer_20251124 tool for computer use also fail with a 400 error, except on Amazon Bedrock (Claude Platform release notes).

On Amazon Bedrock, the model card for Fable 5.2 lists Frankfurt and Zurich only for global cross-region inference. That does not mean the data stays in the EU (AWS Bedrock).

In the Claude Console you can now set up an IP allowlist as a beta, with up to 1,000 entries per organisation. Anthropic refuses requests from other addresses to the covered services, so a stolen API key is of little use there. Anthropic's IP allowlist documentation lists which services are covered.

Admins with the AI Administrator or Global Administrator role switch on Claude in Copilot in the Microsoft 365 admin center. The path is Copilot, Settings, View all and "AI providers operating as Microsoft subprocessors". There they select Anthropic and save, then select the users or groups and save again.

We also checked Meta, Aleph Alpha, DeepSeek, Qwen, Cohere, AWS, n8n, Make and Zapier as well as the European Commission, the RTR KI-Servicestelle, the Bundesnetzagentur and the data protection authorities in Austria, Germany and Switzerland, and selected no item from them for this issue. Benchmark claims, stock market listings and funding news stay out on purpose.

If you want to know what one of these changes means for your existing workflows, we are happy to talk it through in an AI consulting call.

Other issues of the AI briefing: week 41/2026 · week 42/2026 · week 43/2026 · week 44/2026 · week 45/2026.

ShareEmail

Related reading

AI models

Got a workflow like this?

Tell me about it. Honest take and a rough price, usually within a day.

Robert Van Ysendyck · Founder & Managing Director